IEEE 802.11ay wireless technology: Next-gen 60GHz WiFi

A new standard for 60GHz Wi-Fi goes beyond 802.11ad wireless speed & range

A new standard for high speed multi-gigabit WiFi is emerging.  Though products based on the IEEE 802.11ad (WiGig) standard have really only begun rolling out, an effort to deliver an enhancement called IEEE 802.11ay that promises to deliver faster and longer range Wi-Fi networks is gaining steam.

The up-coming 802.11ay is as an enhancement of 802.11ad in the unlicensed 60 GHz millimeter wave band of spectrum, and should be a natural upgrade. The upgrade will offer significant speed and range improvements.

IEEE 802.11ay 60GHz networking
CableFree WiFi Logo

Technical Summary

802.11ay is a type of WLAN in the IEEE 802.11 set of WLANs. It will have a frequency of 60 GHz, a transmission rate of 20–40 Gbit/s and an extended transmission distance of 300–500 meters. It has also been noted that it is likely to have mechanisms for channel bonding and MU-MIMO technologies. It is expected to be released in 2017. 802.11ay will not be a new type of WLAN in the IEEE 802.11 set, but will simply be an improvement on 802.11ad.

Where 802.11ad uses a maximum of 2.16 GHz bandwidth, 802.11ay bonds four of those channels together for a maximum bandwidth of 8.64 GHz. MIMO is also added with a maximum of 4 streams. The link-rate per stream is 44Gbit/s, with four streams this goes up to 176Gbit/s. Higher order modulation is also added, probably up to 256-QAM.   802.11ay applications could include replacement for Ethernet and other cables within offices or homes, and provide backhaul connectivity outside for service providers.

What is the difference between ad and ay?

The 802.11ad standard was published in 2012 and the technology gives devices access to the unlicensed and relatively unclogged 60 GHz millimeter wave spectrum band for multimedia streaming, VR headset connectivity, computer-to-monitor wireless links and other apps that don’t require more than say 30 or 40 feet of unimpeded space. It has been adopted by chipmakers as well as vendors of routers, access points and other devices. The Wi-Fi Alliance runs a WiGig certification program for vendors, and the early 11ad gear on the market most commonly supports data transfer rates of 4.6Gbps – way faster than 802.11n and 11ac, but more limited in range and unable to penetrate solid objects.

The backwards compatible 802.11ay amendment to 802.11ad is designed to boost speeds several-fold. That initially would amount to a transmission rate of 20 to 30Gbps and a range of 33 to 100 feet with 11ay-to-11ay device setups, but once channel bonding, MIMO and other capabilities are exploited, you could be getting closer to 200Gbps and reaching distances approaching 1,000 feet, according to industry players.

11ay, as the specs are being developed, “is really allowing for a wider range of products than you’d get with ad, which has one set of data rates that everyone supports… ay has a lot more parameters to play with in channel bonding, MIMO and features at the MAC level to allow a far greater range of performance and products” according to one chipset vendor.

Other up-coming Fast WiFi standards: 802.11ax

IEEE 802.11ay 60GHz networking
IEEE 802.11ay 60GHz networking

Users should not confuse 802.11ay with 802.11ax, which will work in the 2.5 and 5 GHz bands.  The lower frequency bands for 11ax will penetrate walls.  11ay will not.

What will 802.11ay be used for?

It remains to be seen how soon the high speeds of 11ay will really be needed for internal uses, as 802.11ac — including Wave 2 products — are already pretty robust. But experts say that if 11ad doesn’t quite do it for you given its distance limitations, “11ay will finally be the technology that would let you snip that Ethernet cord – you no longer have to run Ethernet cables to everyone’s desk… there’s enough wireless bandwidth in ay.”

Many are enthusiastic about 802.1ay’s potential as a fixed point-to-point or point-to-multipoint outdoor backhaul technology, especially in light of scaled back fiber rollout plans by providers like Google and Verizon in the face of extraordinary costs associated with such implementations. “I’m more bullish on using ad & ay for backhaul (instead of mesh) in the case of campus & city networks — provided that it has a useful range” according to one industry expert

But it’s possible that 802.11ay could find a role in internal mesh and backbone networks as well as for other uses such as providing connectivity to VR headsets, supporting server backups and handling cloud applications that require low latency. “I believe that eventually, there will be enterprise applications for this – but it’s probably a few years into the future, given that we will have 802.11ax fairly soon & because there’s still a lot of 5 GHz band available for that (and ac).

When will 802.11ay become reality?

The 802.11ay task group had its initial meeting in 2015 and the spec only hit the Draft 0.1 stage in January. Though it is expected to reach Draft 1.0 by July 2017, according to the IEEE task group. If that mark is hit, expect pre-standard 11ay products to start rolling out within a year of that time.

Who is behind 802.11ay?

The IEEE task force leading the 11ay work includes representatives from major equipment and chipsets vendors.  The group states its goal as this: “Task Group ay is expected to develop an amendment that defines standardized modifications to both the IEEE 802.11 physical layers (PHY) and the IEEE 802,11 medium access control layer (MAC) that enables at least one mode of operation capable of supporting a maximum throughput of at least 20 gigabits per second (measured at the MAC data service access point), while maintaining or improving the power efficiency per station. This amendment also defines operations for license-exempt bands above 45 GHz while ensuring backward compatibility and coexistence with legacy directional multi-gigabit stations (defined by IEEE 802.11ad-2012 amendment) operating in the same band.”

For Further Information

Please Contact Us

10Gbps MMW Links installed for Safe City Applications

CableFree 10Gbps MMW links have been installed for Safe City applications

Using the latest 10Gbps Millimeter Wave wireless technology, the links connect Safe City customer sites with a full 10Gbps (10Gig-E) full duplex capacity, with no compression or slow-down.

10Gbps MMW Links installed in the Middle East
10Gbps MMW Links installed for Safe City Applications

CableFree has pioneered high speed 10 Gigabit Millimeter Wave (MMW) technology to connect sites where fibre optics are unavailable, too slow to provision, too expensive or at risk of damage. In busy cities, fibre optics is usually installed in ducts underground which are prone to disruption when digging or building works take place.

This client had already installed fibre optics for major CCTV backbones around the city. However, 3rd party building works disrupted the ducts severing the fibres, causing major outage in the network and loss of CCTV coverage – putting citizens at risk.

10Gbps MMW Links installed in the Middle East
10Gbps MMW Links installed for Safe City Applications

CableFree 10Gbps Millimeter Wave links offer an ideal alternative to fragile fibre optics: the radio units are installed on sites owned by the customer, bringing the full network under user control and management. The units are typically mounted on building rooftops well away from street-level disruption, which are easy to access, secure and defend. MMW wireless links can be installed in hours, not weeks, and at a tiny fraction of the cost of trenches and ducts for fibre optics.

Reliable operating distances of 5-8km depending on climatic region are ideal for city-scale networks. A full range of planning tools allows users to predict performance prior to purchase or installation. The E-band (70-80GHz) frequencies are available in many countries with “light license” and are uncongested, with narrow “pencil beams” allowing dense re-use of the spectrum with no interference between links or users. The narrow beams make such link are inherently secure, with proprietary signals and encoding.

ACM Automatic Coding Modulation for 10Gbps MMW Links
ACM Automatic Coding Modulation for 10Gbps MMW Links

For long links, the Adaptive Coding and Modulation feature enables the MMW link to dynamically adjust modulation in high rainfall conditions to ensure link uptime, capacity and range are maximised. For shorter links and long links in low rainfall regions, the links retain 10Gbps at all times.

10Gbps MMW links are a movable asset: if the network requirements change, or different sites require connecting, the links can be moved to the new sites immediately, retaining all the investment in infrastructure. For Special Events and Disaster Recovery, temporary links can be deployed using generator or alternative “off grid” (Solar + Battery) power if no AC power is available on sites. The units can be mounted on tripods or stationary vehicles as required for rapid deployment.

ACM Automatic Coding Modulation for 10Gbps MMW Links
ACM Automatic Coding Modulation for 10Gbps MMW Links

For mobile operators, advanced features such as IEEE 1588v2, SyncE and management are included which make CableFree MMW ideal for RAN backhaul for 4G & 5G networks. CableFree 10Gbps MMW is upgradable to 20Gbps and 40Gbps with “stacking” giving the very highest throughput in the wireless industry, comparable to fibre optic backbone networks.

For more information please visit the CableFree website or contact our expert team:

Gigabit Wireless: CableFree MMW links deployed in the UAE

Gigabit Wireless Metro Networks: CableFree MMW links deployed in the UAE

CableFree MMW Link in UAE - night

CableFree has deployed Gigabit Wireless MMW links for Public Safety networks in the UAE with regional partner CDN (Computer Data Networks). For this project a number of 1Gbps MMW links have been implemented to upgrade and extend existing network infrastructure for Safe City applications.

CableFree Millimeter Wave (MMW) links offer up to 10Gbps Full Duplex capacity and are proven to operate well in the harsh climate and conditions in regions such as the UAE, including recent record summer temperatures. CableFree worked closely with CDN to ensure high uptime and availability are ensured throughout the network.

CableFree MMW Link in UAE

CableFree MMW is a proven and robust high speed technology for Line of Sight links.  High frequency microwave signals between 60 and 90GHz have “pencil beam” properties that avoid any interference and enable dense deployment in busy urban areas.
Applications for Millimeter Wave include 4G/LTE Mobile Backhaul, Safe Cities, Government, Corporate CCTV and ISP backbones.
Distances up to 5-15km can be deployed reliably: CableFree provide a full range of planning tools to enable customers to plan for high availability even in high rainfall regions.

CableFree MMW Link in UAE

CableFree MMW links are ideal for implementing wireless networks in many regions and can upgrade existing congested unlicensed and licensed microwave links, and extend the reach of fibre optic cabling.  The links are rapid to deploy within hours and can provide permanent, temporary or disaster-recovery scenarios, including resilient backup to fragile fibre optic cables and leased lines.

For more information on Millimeter Wave and Wireless Metro Networks please contact the CableFree team:

FSO Guide – Free Space Optics, Optical Wireless

FSO (Free Space Optics, Laser, Optical Wireless) Guide

Free Space Optics (FSO) communications, also called Optical Wireless (OW) or Infrared Laser, refers to the transmission of modulated visible or infrared (IR) beams through the atmosphere to obtain optical communications. Like fibre, Free Space Optics (FSO) uses lasers to transmit data, but instead of enclosing the data stream in a glass fibre, it is transmitted through the air. Free Space Optics (FSO) works on the same basic principle as Infrared television remote controls, wireless keyboards or IRDA ports on laptops or cellular phones.

History of Free Space Optics (FSO)
The engineering maturity of Free Space Optics (FSO) is often underestimated, due to a misunderstanding of how long Free Space Optics (FSO) systems have been under development. Historically, Free Space Optics (FSO) or optical wireless communications was first demonstrated by Alexander Graham Bell in the late nineteenth century (prior to his demonstration of the telephone!). Bell’s Free Space Optics (FSO) experiment converted voice sounds into telephone signals and transmitted them between receivers through free air space along a beam of light for a distance of some 600 feet. Calling his experimental device the “photophone,” Bell considered this optical technology – and not the telephone – his pre-eminent invention because it did not require wires for transmission.

Although Bell’s photophone never became a commercial reality, it demonstrated the basic principle of optical communications. Essentially all of the engineering of today’s Free Space Optics (FSO) or free space optical communications systems was done over the past 40 years or so, mostly for defense applications. By addressing the principal engineering challenges of Free Space Optics (FSO), this aerospace/defence activity established a strong foundation upon which today’s commercial laser-based Free Space Optics (FSO) systems are based.

How Free Space Optics (FSO) Works
Free Space Optics (FSO) transmits invisible, eye-safe light beams from one “telescope” to another using low power infrared lasers in the terahertz spectrum. The beams of light in Free Space Optics (FSO) systems are transmitted by laser light focused on highly sensitive photon detector receivers. These receivers are telescopic lenses able to collect the photon stream and transmit digital data containing a mix of Internet messages, video images, radio signals or computer files. Commercially available systems offer capacities in the range of 100 Mbps to 2.5 Gbps, and demonstration systems report data rates as high as 160 Gbps.

Free Space Optics (FSO) systems can function over distances of several kilometres. As long as there is a clear line of sight between the source and the destination, and enough transmitter power, Free Space Optics (FSO) communication is possible.

FSO: Wireless Links at the Speed of Light
Unlike radio and microwave systems, Free Space Optics (FSO) is an optical technology and no spectrum licensing or frequency coordination with other users is required, interference from or to other systems or equipment is not a concern, and the point-to-point laser signal is extremely difficult to intercept, and therefore secure. Data rates comparable to optical fibre transmission can be carried by Free Space Optics (FSO) systems with very low error rates, while the extremely narrow laser beam widths ensure that there is almost no practical limit to the number of separate Free Space Optics (FSO) links that can be installed in a given location.

How Free Space Optics (FSO) benefits you
FSO is free from licensing and regulation which translates into ease, speed and low cost of deployment. Since Free Space Optics (FSO) transceivers can transmit and receive through windows, it is possible to mount Free Space Optics (FSO) systems inside buildings, reducing the need to compete for roof space, simplifying wiring and cabling, and permitting Free Space Optics (FSO) equipment to operate in a very favourable environment. The only essential requirement for Free Space Optics (FSO) or optical wireless transmission is line of sight between the two ends of the link.

For Metro Area Network (MAN) providers the last mile or even feet can be the most daunting. Free Space Optics (FSO) networks can close this gap and allow new customers access to high-speed MAN’s. Providers also can take advantage of the reduced risk of installing an Free Space Optics (FSO) network which can later be redeployed.

The Market. Why FSO? Breaking the Bandwidth Bottleneck
Why FSO? The global telecommunications network has seen massive expansion over the last few years. First came the tremendous growth of the optical fiber long-haul, wide-area network (WAN), followed by a more recent emphasis on metropolitan area networks (MANs). Meanwhile, local area networks (LANs) and gigabit Ethernet ports are being deployed with a comparable growth rate. In order for this tremendous network capacity to be exploited, and for the users to be able to utilize the broad array of new services becoming available, network designers must provide a flexible and cost-effective means for the users to access the telecommunications network. Presently, however, most local loop network connections are limited to 1.5 Mbps (a T1 line). As a consequence, there is a strong need for a high-bandwidth bridge (the “last mile” or “first mile”) between the LANs and the MANs or WANs.


A recent New York Times article reported that more than 100 million miles of optical fibre was laid around the world in the last two years, as carriers reacted to the Internet phenomenon and end users’ insatiable demand for bandwidth. The sheer scale of connecting whole communities, cities and regions to that fiber optic cable or “backbone” is something not many players understood well. Despite the huge investment in trenching and optical cable, most of the fibre remains unlit, 80 to 90% of office, commercial and industrial buildings are not connected to fibre, and transport prices are dropping dramatically.

Free Space Optics (FSO) systems represent one of the most promising approaches for addressing the emerging broadband access market and its “last mile” bottleneck. Free Space Optics (FSO) systems offer many features, principal among them being low start-up and operational costs, rapid deployment, and high fiber-like bandwidths due to the optical nature of the technology.

Broadband Bandwidth Alternatives
Access technologies in general use today include telco-provisioned copper wire, wireless Internet access, broadband RF/microwave, coaxial cable and direct optical fiber connections (fiber to the building; fiber to the home). Telco/PTT telephone networks are still trapped in the old Time Division Multiplex (TDM) based network infrastructure that rations bandwidth to the customer in increments of 1.5 Mbps (T-1) or 2.024 Mbps (E-1). DSL penetration rates have been throttled by slow deployment and the pricing strategies of the PTTs. Cable modem access has had more success in residential markets, but suffers from security and capacity problems, and is generally conditional on the user subscribing to a package of cable TV channels. Wireless Internet access is still slow, and the tiny screen renders it of little appeal for web browsing.

Broadband RF/microwave systems have severe limitations and are losing favor. The radio spectrum is a scarce and expensive licensed commodity, sold or leased to the highest bidder, or on a first-come first-served basis, and all too often, simply unavailable due to congestion. As building owners have realized the value of their roof space, the price of roof rights has risen sharply. Furthermore, radio equipment is not inexpensive, the maximum data rates achievable with RF systems are low compared to optical fiber, and communications channels are insecure and subject to interference from and to other systems (a major constraint on the use of radio systems).

Free Space Optics (FSO) Advantages
Free space optical (FSO) systems offers a flexible networking solution that delivers on the promise of broadband. Only free space optics or Free Space Optics (FSO) provides the essential combination of qualities required to bring the traffic to the optical fiber backbone – virtually unlimited bandwidth, low cost, ease and speed of deployment. Freedom from licensing and regulation translates into ease, speed and low cost of deployment. Since Free Space Optics (FSO) optical wireless transceivers can transmit and receive through windows, it is possible to mount Free Space Optics (FSO) systems inside buildings, reducing the need to compete for roof space, simplifying wiring and cabling, and permitting the equipment to operate in a very favorable environment. The only essential for Free Space Optics (FSO) is line of sight between the two ends of the link.

Security and Free Space Optics (FSO)
The common perception of wireless is that it offers less security than wireline connections. In fact, Free Space Optics (FSO) is far more secure than RF or other wireless-based transmission technologies for several reasons:
Free Space Optics (FSO) laser beams cannot be detected with spectrum analyzers or RF meters
Free Space Optics (FSO) laser transmissions are optical and travel along a line of sight path that cannot be intercepted easily. It requires a matching Free Space Optics (FSO) transceiver carefully aligned to complete the transmission. Interception is very difficult and extremely unlikely
The laser beams generated by Free Space Optics (FSO) systems are narrow and invisible, making them harder to find and even harder to intercept and crack
Data can be transmitted over an encrypted connection adding to the degree of security available in Free Space Optics (FSO) network transmissions.
Free Space Optics (FSO) Challenges
The advantages of free space optical wireless or Free Space Optics (FSO) do not come without some cost. When light is transmitted through optical fiber, transmission integrity is quite predictable – barring unforseen events such as backhoes or animal interference. When light is transmitted through the air, as with Free Space Optics (FSO) optical wireless systems, it must contend with a a complex and not always quantifiable subject – the atmosphere.

Attenuation, Fog and Free Space Optics (FSO)
Fog substantially attenuates visible radiation, and it has a similar affect on the near-infrared wavelengths that are employed in Free Space Optics (FSO) systems. Note that the effect of fog on Free Space Optics (FSO) optical wireless radiation is entirely analogous to the attenuation – and fades – suffered by RF wireless systems due to rainfall. Similar to the case of rain attenuation with RF wireless, fog attenuation is not a “show-stopper” for Free Space Optics (FSO) optical wireless, because the optical link can be engineered such that, for a large fraction of the time, an acceptable power will be received even in the presence of heavy fog. Free Space Optics (FSO) optical wireless-based communication systems can be enhanced to yield even greater availabilities.

Fog is a major source of attenuation of FSO (Free Space Optics) infrared signals
Fog is a major source of attenuation of FSO (Free Space Optics) infrared signals

Free Space Optics (FSO) and Physical Obstructions
Free Space Optics (FSO) products which have widely spaced redundant transmitters and large receive optics will all but eliminate interference concerns from objects such as birds. On a typical day, an object covering 98% of the receive aperture and all but 1 transmitter; will not cause an Free Space Optics (FSO) link to drop out. Thus birds are unlikely to have any impact on Free Space Optics (FSO) transmission.

Free Space Optics (FSO) Pointing Stability – Building Sway, Tower Movement
Only wide-beamwidth fixed pointed Free Space Optics (FSO) systems are capable of handling the vast majority of movement found in deployments on buildings. Narrow beam systems are unreliable, requiring manual re-alignment on a regular basis, due to building movement. ‘Wide beam’ means more than 5milliradians. Narrow systems (1-2mRad) are not reliable without a tracking system
The combination of effective beam divergence and a well matched receive Field-of-View (FOV) provide for an extremely robust fixed pointed Free Space Optics (FSO) system suitable for most deployments. Fixed-pointed Free Space Optics (FSO) systems are generally preferred over actively-tracked Free Space Optics (FSO) systems due to their lower cost.

Free Space Optics (FSO) and Scintillation
Performance of many Free Space Optics (FSO) optical wireless systems is adversely affected by scintillation on bright sunny days; the effects of which are typically reflected in BER statistics. Some optical wireless products have a unique combination of large aperture receiver, widely spaced transmitters, finely tuned receive filtering, and automatic gain control characteristics. In addition, certain optical wireless systems also apply a clock recovery phase-lock-loop time constant that all but eliminate the affects of atmospheric scintillation and jitter transference.

Solar Interference and Free Space Optics (FSO)
Solar interference in Free Space Optics (FSO) free space optical systems can be combated in two ways. Optical narrowband filter proceeding the receive detector used to filter all but the wavelength actually used for intersystem communications. To handle off-axis solar energy, sophisticated spatial filters have been implemented in CableFree systems, allowing them to operate unaffected by solar interference that is more than 1 degree off-axis.

Free Space Optics (FSO) Reliability
Employing an adaptive laser power (Automatic Transmit Power Control or ATPC) scheme to dynamically adjust the laser power in response to weather conditions will improve the reliability of Free Space Optics (FSO) optical wireless systems. In clear weather the transmit power is greatly reduced, enhancing the laser lifetime by operating the laser at very low-stress conditions. In severe weather, the laser power is increased as needed to maintain the optical link – then decreased again as the weather clears. A TEC controller that maintains the temperature of the laser transmitter diodes in the optimum region will maximize reliability and lifetime, consistent with power output allowing the FSO optical wireless system to operate more efficiently and reliably at higher power levels.

For more information on Free Space Optics, please Contact Us

Top of page

Planning a Gigabit Wireless Network

Planning a Gigabit Wireless Network

Planning involves a Gigabit Wireless network requires some consideration to ensure a reliable, high performance network and choice of appropriate technologies.
Some topics include:

Gigabit Wireless Technology
Gigabit Wireless Technology

Site Survey

  • Does Line of Sight (LOS) exist?
  • Desktop Survey / feasibility check
  • Physical Survey
  • RF / Spectral Survey
  • Distances required to cover

Choice of Technology:

Our expert team has over 18 years experience in planning and deploying Gigabit Wireless Networks in over 65 countries, including indoor and outdoor wireless networks.  Our team will be delighted to assist with all aspects of design, planning and deployment.

For more information or questions on Technologies for Gigabit Wireless Networking please Contact Us

Gigabit Wireless Technologies

Gigabit Wireless Technologies

Which technologies can we consider for a modern Gigabit Wireless Network?

Building a Gigabit Wireless Network
Building a Gigabit Wireless Network

Building a modern Gigabit Wireless Network will require choosing the appropriate technology for the precise network requirements.  With wireless, there is no “magic technology” or “one size fits all” approach – a successful network deployment will consider which technologies are best suited

Choosing the correct technology for a Gigabit Wireless Network is essential to ensure you have the very best throughput, capacity and network uptime.

Ask our team of experts who will be delighted to assist in designing an choosing exactly the right products and solutions to meet your needs

Contact us with any questions and requirements:


Welcome to!

Welcome to

Welcome – to the informational site for Gigabit Wireless Networking.  We consider the available technologies for Gigabit Wireless Metropolitan Area Networks including:

Welcome to
Welcome to

Feel welcome to read our site and find out more about building modern, reliable and scalable Gigabit Wireless Networks for Wireless Metropolitan Area Networks (Wi-Man), 4G/LTE backhaul networks, Small Cell Backhaul, Corporate Networks and Campus and CCTV wireless networks.

We include technology introduction papers as well as usage cases to guide users in the very latest in Gigabit Wireless technology and deployment.  Modern wireless products can reach 10Gbps or higher capacity.

Applications for Wireless

Welcome - Gigabit Wireless
Gigabit Wireless Technology

Gigabit Wireless networks are used in a wide range of applications which include

  • Safe Cities
  • Smart Cities
  • 4G/LTE Backhaul Networks
  • Broadband Wireless
  • Last Mile Networks
  • Campus Sites
  • Corporate Networks
  • Education networks
  • Metro WiFi
  • Security and CCTV

If you are considering a wireless network with 10Gbps or higher capacity, please ask our team of experts who will be delighted to assist:

For further Information on 10GBE Wireless

For more information please Contact Us